LFY-625 Hot Rod Method Plastic Combustion Performance Tester

Main application
It is applicable for the determination of plastic combustion performance through the use of a hot rod. The method involves using a hot rod with a diameter of 8mm and a temperature of 960℃ as the ignition source. It is placed in contact with the end face of the sample for 3 minutes, then the hot rod is held away from the sample. The combustion behavior of the sample is observed and recorded starting from the moment the hot rod comes into contact with the sample. Based on the combustion condition, the combustion performance of the sample is judged. It can be used by the plastic industry, inspection departments, and research institutions.

Technical indicators
1. Diameter of silicon carbide rod: 8mm, Temperature: (950 ± 10) ℃
2. Sample size: Length 125mm, Width 10mm, Thickness 4mm
3. Contact time between silicon carbide rod and sample: 3 minutes
Applicable standards (different standards require different accessories)
GB/T 2407-2008 Plastics - Determination of Combustion Characteristics of Small Test Samples in Contact with Hot Rods
GB/T 6011-2005 Method for Combustion Performance Testing of Fiber-Reinforced Plastics - Hot Rod Method