LFY-710C Medical Catheter Power Injection Flow and Pressure Tester

Main purpose/Use 
The device is applicable for testing the steady flow rate of the injection solution passing through the intravascular catheter and the pressure at the catheter inlet under a constant injection pressure in dynamic injection.
Technical Specifications
1. Equipped with a closed-loop constant temperature water bath;
2. Equipped with a high-precision sensor to measure the mass of the fluid flowing out of the catheter, with an accuracy of ±2%. 
3. Reagents: Injection solution or simulated injection solution; 
4. The water temperature of the constant temperature water bath is 37℃ ± 2℃. 
5. Constant pressure device: During the measurement process, maintain the pressure within ±5% of the clinical usage pressure. 
6. Online pressure testing system measurement range: 0 - 30 kPa; 
7. Sensor range: 0 - 500g, measurement accuracy: ±2% 
8. Power Supply: 220V, 50Hz. 
Applicable Standards 
YY 0285.1-2017 Intravascular Catheter - Single-Use Sterile Catheter - Part 1: General Requirements 
 

Related products: 
LFY-710 Catheter Flow Meter 

Power injection flow test device, catheter power injection flow and pressure tester, medical catheter power injection flow and pressure testing instrument